The FT550 Connector Kit is recommended for those who have upgraded to the FT550 ECU and want to modify their existing harness for the new FT550 connectors.
Kit includes:
(2) FT550 Connectors (A &a...
Use this kit when building a custom harness while using injectors with Nippon Denso connectors.
Kit Includes: Nippon Denso injector connector, (2) terminals, (2) seals.
Whether you're building your own harness or modifying an existing one, this CPC connector kit will make it easy for you to pass wires through your firewall.
Kit Includes:
Male and female connector...
High quality sealed relay which is typically used for ECU, injectors, and coils when building your own harness.
One relay required per item being wired.
Electrical Connections:85 - Trigger - FT aux...
Whether you're building your own harness or modifying an existing one, this CPC connector kit will make it easy for you to pass wires through your firewall.
Kit Includes:
Male and female connector...
Typically used to monitor fuel, oil, and wastegate pressure.
*Not compatible with FuelTech complete harnesses such as PRO600, PRO550, LS550, etc. Use PS-150 for these applications.
TECHNICAL DESCRI...
Vital data in order to measure whether the turbo is operating within its compressor map and at its highest efficiency. By inputting blade count you can measure rotational speed and maximize your tu...
The technology advance in the motorsport is noticed for the progressive increase of embedded electronics, and that’s a reality on both street and competition. One of the hottest topics nowadays whe...
Typically used for wheelie bar load cells.
TECHNICAL DESCRIPTION
Output: 0.5-4.5V
Supply: 5V
Range: 0-3000 psi
Thread size: 1/8" NPT
Connector Pinout:
A - Ground
B - 5V
C - Signal
This sensor is needed if you are exceeding the limit of your internal map sensor on your ECU or want to run an external map sensor on your setup. Reads up to 135.3 psi!
Output: 0.5-4.5V
Supply: 5V...
Type K Thermocouple Adapter.
Use to connector Racepak thermocouples to FuelTech EGT-8 CAN.
*Please note that when using the EGT-8 CAN all the thermocouples will connect to a single box. If using ex...
Use this kit when building a custom harness while using injectors with EV6/EV14 connectors.
Kit Includes: EV6/EV14 injector connector, (2) terminals, (2) seals.
